Key takeaways
- A slim infrared panel in the 350-600W range suits a single bedroom or home office as supplemental or primary heat in a mild climate, while a larger…
A slim infrared panel in the 350-600W range suits a single bedroom or home office as supplemental or primary heat in a mild climate, while a larger 1000-1500W convection or dual-technology panel is the better fit for a living room or a colder region where the panel needs to be the main heat source for the space. Wattage relative to room size, mounting clearance, and safety certifications matter far more to real-world performance than brand or finish, so this guide focuses on matching the panel type and output to the room rather than ranking specific models.
Infrared vs. convection panels
Infrared (radiant) panels heat objects and people directly in their line of sight rather than heating the air first, which means they can feel warm quickly even in a drafty or high-ceilinged room, but they heat less effectively around corners or outside their direct radiant field. Convection panels heat the air passing through or near the unit, which then circulates through the room; they tend to warm a whole room more evenly but take longer to reach a comfortable temperature after a cold start. Some panels combine both technologies. Neither type is a universal upgrade over the other – the better choice depends on room layout, ceiling height, and whether the panel needs to be a primary or supplemental heat source.
Sizing a panel to the room
A commonly used rough guide is about 10 watts per square foot for a well-insulated room used as supplemental heat, rising toward 15-20 watts per square foot for a primary heat source in a room with average insulation, and higher still for poorly insulated spaces, high ceilings, or cold climates. These are general planning figures, not a substitute for a proper heat-loss calculation; a room with large windows, poor insulation, or exposure to an unheated space above or below will need meaningfully more wattage than the simple square-footage rule suggests. Manufacturers often publish a recommended room size range for each model, which is a more specific starting point than a generic per-square-foot rule.
At a glance: wall-mounted panel types
| Type | Best for | Key stated specs | Limits |
|---|---|---|---|
| Slim infrared panel, 350-600W | Supplemental heat for a bedroom, office, or small room | Thin profile (often under 2 inches deep), quiet (no fan), typically IP-rated for light moisture areas | Heats mainly in direct line of sight; less effective as sole heat source in larger or drafty rooms |
| Larger infrared panel, 700-1200W | Primary heat for a mid-size room in a mild to moderate climate | Wider radiant coverage, often with programmable thermostat control | Still radiant-pattern limited; corners and shaded furniture areas warm more slowly |
| Convection panel heater, 1000-2000W | Primary heat for living rooms or colder climates | Even whole-room air heating, often with built-in thermostat and timer | Slower to feel warm from a cold start than infrared; some models have a small fan |
| Dual-technology panel (infrared + convection) | Rooms wanting fast radiant warmth plus even overall heating | Combines both heating methods in one unit | Generally higher cost and power draw than a single-technology panel |
Pick X if…
| Situation | Recommended pick |
|---|---|
| Small room, occasional supplemental heat | Slim infrared panel in the 350-600W range |
| Mid-size room, mild climate, wants fast warm-up feel | Larger infrared panel, 700-1200W, sized to the room |
| Living room or primary heat source in a colder climate | Convection panel heater, 1000W or higher based on room size |
| Bathroom or other moisture-prone room | Panel specifically rated for bathroom/moisture use with an appropriate IP rating, installed per code clearance from water sources |
| Wants both quick radiant comfort and even background heat | Dual-technology panel, budget permitting |
Installation, clearance, and safety
Wall-mounted heating panels generate a hot surface, and manufacturers specify minimum clearances from curtains, furniture, and flammable materials that should be followed exactly, not estimated. Panels intended for bathroom or other high-moisture rooms need an appropriate IP (ingress protection) rating and, in many jurisdictions, specific placement rules relative to a bathtub, shower, or sink – an electrician familiar with local code should confirm placement in these rooms. Panels should be mounted on a wall rated to support their weight, using the maker’s specified mounting hardware, and should never be installed above or within reach of a shower or other direct water spray regardless of IP rating unless the manual explicitly states that placement is approved.
Auto shut-off (overheat protection) and tip-over or fault-detection features are worth checking for specifically where the maker states them, since not every panel includes them. These features are a stated manufacturer specification, not something to assume is present by default, and should be confirmed in the product’s documentation rather than inferred from general category expectations.
Running cost and control features
- Thermostat accuracy: A panel with a built-in digital thermostat generally maintains a more consistent room temperature, and avoids the overshoot/undershoot cycle common with simple on/off models.
- Programmable timers: Useful for rooms used on a predictable schedule, such as a bedroom at night or a home office during work hours, since the panel can avoid heating an empty room.
- Smart/app control: Some panels offer app or voice-assistant integration; this is a convenience feature rather than something that changes the panel’s actual heating performance.
- Running cost: Electric resistance heating, whether infrared or convection, generally costs more to run continuously than a heat pump or central system per unit of heat delivered, which is why these panels are usually best suited to supplemental or single-room use rather than whole-home heating.
Alternatives worth considering
- Freestanding or portable panel heaters: A reasonable alternative where permanent wall mounting is not possible or desired, such as in a rental.
- Oil-filled radiators: Retain heat longer after switching off than most panel heaters, which can suit rooms where a steady background warmth matters more than fast warm-up.
- Mini-split heat pumps: A more efficient option for ongoing primary room heating where the upfront installation cost is acceptable, since they generally cost less to run than resistance heating panels over time.
Frequently Asked Questions
How do I know what wattage panel heater I need for my room?
A common starting estimate is about 10 watts per square foot for supplemental heat in a well-insulated room, rising to 15-20 watts per square foot or more for a primary heat source or a less insulated space. Checking the specific model’s stated recommended room size is a more precise guide than the general rule alone.
Is infrared or convection heating better for a bedroom?
Infrared tends to feel warm quickly since it heats people and surfaces directly, which many people like for a bedroom used mainly at specific times of day. Convection heats the whole room’s air more evenly but takes longer to feel warm from a cold start, which may matter less if the panel runs on a timer ahead of bedtime.
Can I install a heating panel in a bathroom?
Only if the specific model is rated for bathroom or moisture-prone use with an appropriate IP rating, and only if it is installed at the clearance distance from water sources required by local electrical code. A qualified electrician should confirm placement before installation in any bathroom.
Do wall-mounted heating panels have auto shut-off features?
Some models include overheat protection or fault-detection auto shut-off, but this is not universal across all panels, so it should be confirmed in that specific model’s documentation rather than assumed.
How much does it cost to run a wall-mounted heating panel compared to central heating?
Electric resistance panels generally cost more per unit of heat delivered than a heat pump or efficient central system, which is why they tend to work best as supplemental heat for a single room rather than a full-home heating solution. Running cost depends heavily on local electricity rates and how many hours per day the panel operates.
What clearance do I need around a wall-mounted heating panel?
Manufacturers specify minimum clearance from curtains, furniture, and other flammable materials for each model, and this distance should be followed exactly as stated in the installation manual rather than estimated, since panel surface temperatures vary by wattage and design.
- Best Through the Wall Bathroom Exhaust Fan: Picks and What to Look For (2026)
- Best Decorative Wall Mirror under $100: Picks and What to Look For (2026)
- Best Wall Sconce under $100: Picks and What to Look For (2026)
- Best Outdoor Wall Light under $100: Picks and What to Look For (2026)
- Best Bldc Motor with Gearbox: Picks and What to Look For (2026)
- Best Two Hand Control Switch: Picks and What to Look For (2026)