Key takeaways
- The best bathroom two light fixture for most buyers is a damp-rated, two-lamp vanity bar in the 12 to 19 inch range, such as Kichler’s 2-light vanities or the small two-light vanities from Hinkley; choose a wider fixture such as…
The best bathroom two light fixture for most buyers is a damp-rated, two-lamp vanity bar in the 12 to 19 inch range, such as Kichler’s 2-light vanities or the small two-light vanities from Hinkley; choose a wider fixture such as the 25 inch Hinkley Vaughn for a double-width mirror, and an integrated LED model when you want to avoid changing bulbs. In this guide “bathroom two light fixture” means a wall-mounted vanity light with two lamps that sits above or beside a bathroom mirror. The single most important filter is the location rating on the product page, because a fixture rated only for dry locations is the wrong choice for a room that steams up.
Why the location rating comes first
Bathroom lighting is sorted into dry, damp and wet ratings. Dry means an ordinary living area. Damp means a place with moisture in the air but no direct water spray, which covers most bathroom walls above a vanity. Wet means direct water contact, such as inside a shower enclosure. For a vanity two-light fixture, a damp rating is the normal requirement, and it is what the makers covered here print on their pages.
Not every attractive two-light fixture meets that. One example from the search results is Quoizel’s Regency two-light vanity in weathered brass, which is listed as dry rated and so is not a fit for a steamy bathroom. If you love a particular style, look for the rating in the specifications before you plan the wall, and treat any product that does not state one as unconfirmed.
Also note that most listings say “damp rated” without naming the certifying lab. If you need to know the listing agency for a rental property inspection, read the spec sheet or installation sheet supplied with the fixture.
Models worth knowing
Kichler 10798NILED
This is a 2-light LED vanity about 19.25 inches wide and 6 inches tall, in brushed nickel. The maker’s page and dealer listings describe it as approved for damp locations, dimmable and using an integrated LED. The maker lists 32 watts, about 1,740 lumens, a 3000K colour temperature, a 90 CRI, a 45,000 hour rated life and ADA compliance, although some dealers give 30 watts, so go by the sheet that ships with the fixture. An integrated LED means there is no bulb to change, but it also means the whole fixture goes if the module fails.
Kichler 5336NIS
A smaller 2-light brushed nickel vanity, listed at about 12.5 inches wide, damp rated and designed for two A19 bulbs. It is the choice when you want to control the bulb: warm white, daylight or a particular lumen output. Because it takes standard bulbs, you can use dimmable LED bulbs if your dimmer supports them.
Kichler Clyde, Torche and Hex
These are style-led two-light options listed as damp rated. The Clyde in champagne bronze is listed at about 17 inches wide. The Torche in polished nickel is listed at about 5 inches high by 13 inches wide in steel. The Hex in champagne bronze is listed at about 10.25 inches high by 14.25 inches wide with opal glass. They suit a bathroom where the fixture is a visible design feature.
Hinkley small two-light vanities
Hinkley lists its small two-light vanities, including the Foster and the Latitude, as damp rated. The Foster 5132BK is listed at about 13.75 inches wide with tapered clear glass shades and can be mounted facing up or down; the lamps are not included, so read the sheet for the bulb type and maximum wattage. The Latitude 5652BN is listed as about 18 inches wide, damp rated and ADA compliant, taking two G9 bulbs, with the glass facing up only. Mounting direction matters, so read it before buying if you want shades down.
Hinkley Vaughn large two-light vanity
The Vaughn is listed at about 25 inches wide and damp rated, and it needs T9 or T10 bulbs, which are not included. Some finishes can be mounted vertically or horizontally while another finish is vertical only, which affects how it sits next to a mirror.
At a glance
| Fixture | Best for | Key stated specs | Limits |
|---|---|---|---|
| Kichler 10798NILED | Standard vanity mirror, no bulb changes | About 19.25 in wide, integrated LED, dimmable, damp rated | Module not user-replaceable |
| Kichler 5336NIS | Small vanity, choose your own bulbs | About 12.5 in wide, two A19 bulbs, dimmable, damp rated | Narrow; bulbs sold separately |
| Kichler Clyde / Torche / Hex | Design-led bathrooms | Damp rated; widths about 17, 13 and 14.25 in | Small footprints; confirm bulb type per model |
| Hinkley Foster 5132BK | Compact vanity, up or down mounting | About 13.75 in wide, damp rated, mounts up or down | Small width; bulbs not included |
| Hinkley Latitude 5652BN | Accessible bathrooms | About 18 in wide, ADA compliant, damp rated, two G9 bulbs | Shades face up only |
| Hinkley Vaughn | Wide mirror | About 25 in wide, damp rated, T9 or T10 bulbs | Bulbs not included; finish affects orientation |
Budget, mid-range and premium
Budget. Simple steel two-light bars with exposed or shaded bulbs. They do the job and let you choose bulbs. The trade-off is plain finishes and thinner glass, so check the damp rating first, since the cheapest fixtures are the ones most likely to be dry rated.
Mid-range. Brand-name fixtures from makers such as Kichler and Hinkley, with clear damp ratings, a choice between integrated LED and bulb-based designs, and a range of finishes. Most buyers will end up here.
Premium. Larger or designer fixtures with heavier glass, special finishes, dimming-ready LED engines or extra width. Pay for these when the fixture is a showpiece or you need a wider span to light two sinks.
Sizing and placement
Width
A common rule is that a vanity light should be narrower than the mirror it sits above, so the glass does not look crowded. A 12 to 19 inch fixture fits a single-sink mirror, while a 25 inch fixture suits a wider mirror. If you have two sinks, two matched small fixtures one above each sink usually give more even face lighting than one centred bar.
Height and orientation
Shades facing up give soft light toward the ceiling, and shades facing down push light at the face. Where the listing says the fixture can only face up, plan for that. For face lighting, side lights beside the mirror reduce shadows under the eyes, and a bar above the mirror is a fair compromise when the wall space is limited.
Light colour and output
A warm white around 2700K to 3000K is friendly to skin tones. Where the maker lists 3000K and about 1,740 lumens for an integrated LED fixture, that is a reasonable level for a standard bathroom. For bulb-based fixtures, check the bulb base and maximum wattage printed on the fixture and do not exceed it.
Dimming
If the listing says dimmable, it still needs a compatible dimmer. For LED fixtures, follow the maker’s instructions for dimmer type, and use a bulb marked dimmable if you swap bulbs.
Installation and safety notes
Replacing a fixture is a wiring job, and the safest course is to turn the power off at the breaker, confirm the circuit is dead with a tester, and follow the instruction sheet. Local electrical code applies to bathrooms, and a licensed electrician should do the work if you are not trained, if the box needs to be moved or changed, or if there is no ground wire. Use only the bulb type and maximum wattage the maker states, and never install a dry-rated fixture in a bathroom because it matches the decor. Keep any fixture away from direct water spray, and if you find a damaged cord, broken glass or signs of moisture inside the fixture, stop using it.
Check the existing electrical box too. A heavy fixture needs a box that is rated to support it, and the mounting strap that comes with the fixture must fit. If the box is loose, damaged or the wrong type, an electrician can correct it before the new light goes up.
Pick X if
| Pick this | If you |
|---|---|
| Kichler 10798NILED | Want a modern integrated LED bar that dims and needs no bulbs |
| Kichler 5336NIS | Have a small mirror and want to pick your own bulbs |
| Hinkley Latitude 5652BN | Need an ADA-compliant fixture |
| Hinkley Foster 5132BK | Want flexibility to mount lamps up or down |
| Hinkley Vaughn | Have a wide mirror and are happy sourcing T9 or T10 bulbs |
| Kichler Clyde, Torche or Hex | Want the fixture itself to be a feature |
Alternatives
If a two-light bar does not fit your wall, consider a pair of wall sconces on either side of the mirror, which lights faces more evenly. A three- or four-light bar suits a wide mirror when you want more output without going to two separate fixtures. A lit mirror, with the lighting built into the glass, removes the fixture from the wall altogether, and is a fit for a small bathroom. Whichever you choose, apply the same checks for the damp rating, the bulb type and the size of the mirror.
Frequently Asked Questions
Does a bathroom light need to be wet rated?
For a vanity light above a sink, a damp rating is the usual requirement. Wet ratings are for places with direct water contact, such as inside a shower. Always follow the maker’s rating on the product page and local code.
Can I use a dry-rated fixture in a bathroom with a fan?
A fan helps with moisture but does not change the rating of the fixture. If the listing says dry rated only, it is not intended for a bathroom, so choose a fixture that states damp rating.
How wide should a two-light vanity fixture be?
Aim for a fixture that is narrower than the mirror. The models covered here range from about 12.5 inches to 25 inches wide, so match them to the mirror width and the space on the wall.
Integrated LED or bulbs?
Integrated LED removes the job of changing bulbs and often dims well, but the whole fixture is replaced if the module fails. Bulb-based fixtures let you pick colour and output and replace a bulb in seconds.
Can I install a vanity light myself?
It is a common DIY job, but it is wiring, so switch off the circuit at the breaker, follow the instructions and local code. If you are unsure, if the box is damaged or if there is no ground wire, ask a licensed electrician.
Which bulbs does a two-light fixture take?
It depends on the model. The Kichler 5336NIS is listed for two A19 bulbs, the Hinkley Latitude for two G9 bulbs, and the Hinkley Vaughn for T9 or T10 bulbs. Use the type and maximum wattage printed on the fixture.